Snigg Onboarding Guide
1. Connect the charger to your laptop with a micro USB cable.
2. Open a web browser on the laptop. Enter the URL: http://192.168.123.123
3. Login using the following credentials:
Username: operator
Password: yellow_zone
4. Navigate to Backend > Connection. The next step depends on whether you are using a wired (Ethernet) internet connection.
Wired/Ethernet Internet Connection
5. Select “Ethernet”.
6. Nagivate to Backend > OCPP
7. Your OCPP ChargeBoxIdentity (ChargePointID) will be pre-filled. Leave this ID as is.
8. Set OCPP-mode to “OCPP-J 1.6”.
9. Copy the Splash URL provided. wss://cpms.splashrenewable.co.uk/
10. In “JSON OCPP URL”, paste the URL you copied from Splash.
11. Click Save and Restart.
12. Open Splash app. In the Splash app: My charger > Add new charger.
13. Please don’t use the QR scanner and enter your Snigg serial number to proceed.
14. Follow the instructions to finish setting up your charger. After a minute the charger should appear on the map and you can start sharing on Splash!
